1) Clean your screen
Use the provided alcohol wipe to clean your screen thoroughly. Wipe away any streaks with the microfiber cleaning cloth. Gently tap the dust removal sticker over the surface of the screen to remove any dust particles.
2) Position Install Tray
Place installation guide around the device, pressing down for a snug fit around the phone.
3) Place the Protector
While holding the protector, peel off the release liner to expose the adhesive. Then, use the installation guide, camera, and sensors to align the protector on the device.
4) Finishing Touches.
Once aligned, run your finger firmly down the middle of the screen to begin the adhesion. Then, peel off the cap sheet. Finally, remove the installation guide by lifting from the bottom.
5) Register for FREE Lifetime Replacements
Please visit https://www.bodyguardz.com/advantage_program_howto.html to learn how to create an Advantage Program account and Register your screen protector.