1) Clean your Screen and Place Installation Guide
Use the provided alcohol wipe to clean your screen thoroughly. Wipe away any streaks with the microfiber cleaning cloth. Gently tap the dust removal sticker over the surface of the screen to remove any dust particles. Then, firmly place the installation guide on top of the device.
2) Align Protector
While holding the protector, peel off the release liner to expose the adhesive. Use the installation guide to align and place the protector on the device, starting at the bottom.
3) Remove Air Bubbles
Once aligned and placed, slowly push air bubbles out by running the plastic squeegee from the bottom to the top of the device. Use firm, even pressure. Repeat as needed. Remove the cap sheet.
4) Finishing Touches
Remove the installation guide. Adhere the protector to your device by running the squeegee along the edges to push out any remaining bubbles.
5) Register for FREE Lifetime Replacements
Please visit https://www.bodyguardz.com/advantage_program_howto.html to learn how to become an Advantage Program member and Register for Lifetime Replacements on your protector.